IP54 Twsit Lock Photocell Shorting Cap JL-208 LONGJOIN

JL-208 photocell Short-circuit cap can be used to maintain the continuity of the socket during maintenance or embedment
ANSI C136.10 twist-lock 3 pin
IP54 protection level can be achieved after installation
With surge protection
Ultraviolet stabilized poly-carbonate shell
High-impact polyethylene phosphorylate group

When does the short circuit cap of our optical controller need to be used?
1-The controller of an existing street lamp has been damaged and needs to be updated in time to replace it.；
2-The street lights of municipal projects need to be updated and upgraded, so they need to be temporarily replaced with short-circuit caps to maintain the normal use of road lighting.
3-by photocell shorting cap mount light fixture is purposed to whether or not it works as expected, was able to determine the problem was the fixture and not the photocell. Made the fixture warranty claim easier too as I was able to explain how I knew the photocell was not the problem.

Three-view

JL-208 Photocell Shorting Cap Parameter

Installation Instructions

*Disconnect the power supply.
*Connect the socket according to the figure below.
*Push on the short circuit cap and turn it clockwise to lock it in the socket.

JL-208-12-IP54
1: 12 = MOV 110Joule / 3500Amp
15 = MOV 235Joule / 5000Amp
23 = MOV 460Joule / 7500Amp
Empty=no MOV