Product Description
JL-311A candlestick lamp holder type electronic light control switch is suitable for autonomously controlling candlestick light bulbs based on the ambient lighting level.
Parameter lists
| Item | JL-301A | |
| Rated Voltage | 120VAC | |
| Rated Loading | 75W Tungsten Max | |
| Power Consumption | 0.5W Max | |
| Rated Frequency | 50/60Hz | |
| Typical On/Off Level | 20-40Lx | |
| Ambient Temperature | -40℃ ~ +70℃ | |
| Related Humidity | 96% | |
| Screw Base Type | E12 | |
| Fail Mode | Fail-off | |
Installation Instructions:
1. Turn off the power.
2. Twist off the light bulb.
3. Screw the photo control switch fully into the lamp socket.
4. Screw the light bulb into the bulb holder of the photo control switch.
5. Connect the power and turn on the light switch.
*During installation, do not aim the photosensitive hole towards artificial or reflective light, as it may cycle on or off at night.
*Avoid using this product in opaque glass lamps, reflective glass lamps, or wet areas.
Initial Testing
When first installed, the light controller usually takes a few minutes to turn off. To test “on” during the day, cover the photosensitive window with black tape or opaque material. Do not cover it with your fingers, as the light passing through your fingers may be enough to turn off the light control device. The light controller test takes about 2 minutes.
JL-311A Y
1: Y=Silver lamp holder
null=Golden lamp holder
Post time: Mar-12-2024