Product Description
JL-235CZ twist Lock Smart Light Control Switch is suitable for cloud control and self-control mode. It can be used in municipal roads, park lighting, landscape lighting, etc.
This product built-in ZigBee communication module. When used with JL-236CG (main controller), it can be remotely controlled through the UMN-9900 Smart Pole Management System.
Product Features
. ANSI C136.10 twist Lock
· Fail-on mode
· Delay of 5-20 seconds
· Multi-voltage availability
· Built-in surge protection
· IR-Filtered Phototransistor
Product Parameter
|
Model No. |
JL-235CZ |
|
Rated Voltage |
120-277VAC |
|
Rated Frequency |
50/60Hz |
|
Rated Loading |
1000W Tungsten, 1000VA Ballast 8A e-Ballast @120Vac 5A e-Ballast @208-277Vac |
|
Power Consumption |
2.4W Max. |
|
Operate Levels |
Turn-On＜100Lx，Turn-Off＞100Lx / per client request |
|
Ambient Temperature |
-40°C ~ +70°C |
|
Related Humidity |
96% |
|
IP level |
IP65 / IP67 |
|
Certifications |
Installation Instructions
· Turn off the power supply.
· Connect the socket according to the following image.
· Push the photocell controller up and rotate it clockwise, locking it in the socket.
· If necessary, adjust the socket position to ensure that the light sensor window points to the north direction shown in the top triangle of the light controller.
Initial Testing
· When installed for the first time, the light controller usually takes a few minutes to turn off.
· To test “on” during the day, cover the light sensor window with an opaque material.
· Do not cover it with your finger, as the light passing through your fingers may be enough to turn off the light controller.
· The light controller test takes about 2 minutes.
*The operation of this light controller is not affected by weather, humidity or temperature changes.
Post time: Dec-04-2023